#BERNINA PINPOINT PLACEMENT INSTRUCTIONS FULL SIZE#
#BERNINA PINPOINT PLACEMENT INSTRUCTIONS PLUS#
#BERNINA PINPOINT PLACEMENT INSTRUCTIONS FREE#

Now all the excess cutaway can be cut away. Stitch gold ribbon for the outline of the trunk the cutaway prevents the fabric puckering. Remove the cutaway with the apron from the embroidery frame, but do not yet trim off the cutaway. Embroider the complete file (gold for the star, red for the baubles and brown for the trunk). These help you position the apron on top of the embroidery frame.В Now insert a pin in the uppermost point of the Christmas tree and place it on the corresponding spot in the embroidered line of the star. This is the shape of the star, the centre lineВ and the bottom of the Christmas tree. Embroider the first colour on the cutaway. Stretch the cutaway in the embroidery frame. Stitch the gold ribbon around the contour of the Christmas tree with a wide zigzag stitch (again with the invisible thread).Д®mbroidering the star, baubles and trunk: Stitch the garland onto the Christmas tree, following the example on the pattern,В using the invisible nylon thread. Now stitch around the edge again with a narrow zigzag line. Trim the edge of the fabric just next to the stitch line. Stitch just next to the pattern piece around the outline of the Christmas tree (without the star and the trunk). Reduce the tension of the sewing machine. Pinpoint placement, enhanced editing functions and total embroidery stitch control give beautiful embroidery every time.

#BERNINA PINPOINT PLACEMENT INSTRUCTIONS PLUS#

Place the pattern piece of the Christmas tree with the fabric on the apron, position it as desired. The 880 Plus from Bernina is the ultimate machine for sewing, embroidery and quilting, with exciting new features that include: Enjoy maximum room with 12 inches of space to the right of the needle and five inches of height. Turn the binderВ over and stitch again, so that the frayed end is hidden between the stitching. Stitch the ties to the back of the apron part. ThenВ stitch them around once again at 1 mm. Stitch the binders, cut out the corners and turn around. Stitch the pieces of Velcro onto the neck ties (from the right side, just next to the bias binding).ДЇold over the hem of the neck straps and stitch. Stitch bias binding around the edges, both around and at the neck. Place the pattern piece in the centre of the fabric fold so there is room for the binders and cut out the pattern. Print out the pattern piece for the Christmas tree, too. Thanks to the bias tape finish, you donвЂ™t have to add a seam value.

#BERNINA PINPOINT PLACEMENT INSTRUCTIONS FULL SIZE#

Print the pattern piece for the apron full size (possibly in a copy shop) andВ extend the parts as indicated.В After extending the lines, the lower edge is 29.5 cm wide.

Bias binding device (optional),В edgestitch footВ no.

BERNINAВ 710 sewing machine, BERNINA 700 embroidery machine (or similar), Maxi (or Jumbo) embroidery hoop.

#BERNINA PINPOINT PLACEMENT INSTRUCTIONS FREE#

The embroidery pattern and the pattern pieces for the apron and the Christmas tree can be downloaded free of charge at the bottom of this blog post.Mettler PolySheen embroidery thread (metallic gold, red вЂPoppyвЂ™ 1902, brown вЂAutumn leafвЂ™ 940, brown вЂRedwoodвЂ™ 933).Shiny gold ribbon to put around the Christmas tree ( Bart and FrancisВ web-shop with international shipping).Red fabric (70 cm, standard fabric width) and green fabric (40 x 40 cm).She drew a Christmas tree and a star, all by herself, forВ her kitchen apron. IsnвЂ™t it wonderful whenВ Lara helps Mummy prepare for the festive dinner! And, of course, she has to be dressed in the Christmas spirit! Lara is 10 years old (150 cm tall) and can draw nicely. With thanks to Bloemen Rosa, Zillebeke вЂ“ Ypres (B) for the photo location.

Bernina pinpoint placement instructions